Clean Steam Generators for Hygienic Steam Systems
Clean steam generator packages produce high-quality steam from treated water using indirect plant-steam or electrical heating for sterilisation, humidification and other hygienic process duties.
Common product routes from broad steam product searches
Broad product searches usually narrow quickly once the buyer identifies the main system problem. If condensate drainage and steam-system efficiency are the first priority, start with steam traps. If the project is really about stabilising downstream pressure at the point of use, move directly into pressure reducing valves.
Where the line also needs non-return protection, compare steam check valves. If hot condensate cannot drain under normal differential pressure, review pressure powered pumps before finalising the wider condensate recovery arrangement.
TVA Steam Flowmeter
Integrated target-type flowmeter for saturated steam and, with the dedicated pressure sensor kit, superheated steam. Density compensation, local display, totalisation, 4-20 mA, pulse and Modbus communication support are combined i
M70i and M80i sanitary ball valves for high-purity shut-off
Spirax Sarco M70i and M80i sanitary ball valves use hygienic true-port 316L construction for high-purity shut-off duties in clean steam and process utility systems.
STERI-TROL clean service control valve
Spirax Sarco STERI-TROL clean service control valves combine hygienic design, drainability and modulating or on-off control for clean steam and clean process duties.
SVL488 clean service safety valve for hygienic overpressure protection
Spirax Sarco SVL488 clean service safety valves provide hygienic overpressure protection for pure steam, clean steam and inert gas systems used in clean-service applications.
SV615 Safety Valve
The Spirax Sarco SV615 is a full-lift, full-nozzle bronze safety valve for steam, air, inert industrial gases and non-hazardous liquids in DN15-DN50 screwed sizes.
EP6 Electro-pneumatic Positioner
A 4-20 mA electro-pneumatic positioner for NAMUR-compatible linear and rotary pneumatic valve actuators, with safe-area and approval-specific Ex configurations.
Spirax Sarco LE33 Two-port Control Valve
A legacy flanged PN16 two-port control valve documented in DN15 to DN100, with equal-percentage trim and verified installation and maintenance limits.
Spirax Sarco UFT32 Sealed Ball Float Steam Trap
The Spirax Sarco UFT32 is a sealed stainless-steel ball float steam trap with integral automatic air venting and a connector-mounted design for differential steam pressures up to 32 bar.
VB21 Stainless Steel Vacuum Breaker
Compact stainless steel vacuum breaker for condensing steam, vapour and liquid systems, with 1/2 inch BSP or NPT connections and operation up to 21 barg.
APT10-4.5 automatic pump trap
Steam-operated PN10 automatic pump trap that switches between trapping and pressure-powered condensate pumping for process and heating plant with low differential pressure, backpressure or vacuum.
CA14 SG Iron Air and Gas Trap
Float-type SG iron automatic liquid drainer for Group 2 air and gas systems, with a Viton valve cone, continuous discharge and screwed or selected flanged connections.
AE14 Automatic Air Vent for Liquid Systems
Spirax Sarco AE14 is a maintainable SG iron float-operated automatic air vent with a Viton valve head for removing air and gases from compatible liquid systems.
UTD52L Universal Thermodynamic Steam Trap
Spirax Sarco UTD52L is a stainless steel bar-stock universal thermodynamic steam trap for use with a separately selected connector in steam main drainage, steam tracing and constant-load duties.
M850 Flow Computer
The M850 is a programmable flow computer for compensated steam, gas and liquid measurement, with 12 inputs, configurable calculations, local recording and plant communications. Wall-mounted M850-W and panel-mounted M850-P variants
HV3 Bronze Globe Stop Valve
A PN25 gunmetal-bodied globe stop valve with screwed BSPP connections from ½ to 2 in for isolating compatible steam, water, oil and air services.