LC2650 Level Controller
LC2650 is a configurable level controller for conductive liquids in boilers, tanks and vessels, with two high/low alarm channels, on/off or modulating control, and 1-6 V or 4-20 mA level inputs.
Common product routes from broad steam product searches
Broad product searches usually narrow quickly once the buyer identifies the main system problem. If condensate drainage and steam-system efficiency are the first priority, start with steam traps. If the project is really about stabilising downstream pressure at the point of use, move directly into pressure reducing valves.
Where the line also needs non-return protection, compare steam check valves. If hot condensate cannot drain under normal differential pressure, review pressure powered pumps before finalising the wider condensate recovery arrangement.
SX90 Process Controller
The Spirax Sarco SX90 is a 1/8 DIN panel-mounted process controller for industrial temperature and pressure control, with universal process inputs, configurable PID control, and selectable VMD, analogue, relay and logic outputs.
TD42 Thermodynamic Steam Trap
TD42 is a maintainable thermodynamic steam trap with an integral strainer and screwed connections for steam, air or condensate/water service within its documented pressure, temperature, differential-pressure and backpressure limit
B1H Inverted Bucket Steam Trap
B1H is a maintainable cast iron inverted bucket steam trap for 1/2 inch and 3/4 inch screwed NPT connections, with stainless steel mechanism and bucket, optional air vent and strainer, and pressure-range selections up to 250 psig.
STS17.2 Compact Pipeline Connector Steam Trapping Station
STS17.2 is a stainless steel compact pipeline connector steam trapping station with pre-assembled isolation, an integral strainer and Quick-Fit maintenance access for a separately selected steam trap within its documented pressure
IT Immersion Tubes
IT immersion tubes distribute condensate into boiler feedtanks through austenitic stainless-steel tubes with sandwich flanges for ANSI 150 or EN 1092 PN16 arrangements, with documented gravity and pumped capacity data for IT100 to
BT6-BH High-capacity Sanitary Balanced Pressure Thermostatic Steam Trap
BT6-BH is a high-capacity sanitary balanced pressure thermostatic steam trap for clean, chemical-free and pure steam condensate removal, with a crevice-free 316L body, full drainability and documented vertical downward-flow instal
TD42L Thermodynamic Steam Trap
TD42L is a maintainable thermodynamic steam trap for relatively small condensate loads, with an integral strainer, screwed BSP T Rp or NPT connections, and an ENP body surface for steam mains drainage and lower-capacity tracing ap
BPC32 Balanced Pressure Thermostatic Steam Trap
BPC32 is a carbon steel, maintainable balanced pressure thermostatic steam trap with straight connections and an integral flat strainer screen for steam, air or condensate/water in its documented Group 2 applications.
BPC32Y Balanced Pressure Thermostatic Steam Trap
BPC32Y is a maintainable carbon steel balanced pressure thermostatic steam trap with straight connections and an integral cylindrical Y-type strainer for documented steam, air and water/condensate service.
TD42S2 Thermodynamic Steam Trap
TD42S2 is a maintainable thermodynamic steam trap with a forged steel body, socket weld ends and an integral stainless steel strainer for documented steam, air or condensate/water service. Lower-capacity TD42S2LC versions are avai
EasiHeat Packaged Heat Exchanger System
A configurable packaged steam-to-water heat exchanger system for approximately 70 kW to 3.45 MW duties, with steam, condensate or dual control options.
GS-X1 Programmable PID Controller
Spirax Sarco GS-X1 is a compact panel-mounted programmable single-loop PID controller with one universal process input, configurable control outputs and optional serial or Ethernet integration for thermal and other process control
GS-X2 Programmable PID Controller
GS-X2 is a 1/8 DIN panel-mounted programmable single-loop PID controller with one universal process input, an optional second input, configurable I/O, isolated 24 Vdc transmitter power and standard EIA-485 communications for therm
GS-X3 Programmable PID Controller
GS-X3 is a 1/4 DIN panel-mounted programmable single-loop PID controller with one universal process input, an optional second input, configurable I/O, isolated 24 Vdc transmitter power and standard EIA-485 communications for therm
DCV41 Austenitic Stainless Steel Disc Check Valve
DCV41 is an austenitic stainless steel disc check valve for preventing reverse flow in process lines, hot water, steam and condensate systems, with screwed or socket-weld connections and documented metal, Viton and EPDM seat optio