Pipeline ancillaries > Air vents
Spirax Sarco AV13 Steam System Air Vent
AV13 is a Spirax Sarco brass balanced-pressure thermostatic air vent for steam systems, used at high points where air and other non-condensable gases need to be removed.
Quick facts
AV13 is a model-level route inside air vents and air eliminators. It is useful when the specification already names AV13, or when a compact brass thermostatic air vent is being checked for a steam main or equipment high point.
Available product material identifies AV13 as a maintainable balanced-pressure thermostatic air vent for steam systems. It has a brass body, angle connection, BSP or NPT threaded connections, PN16 design condition and a maximum operating pressure of 13 bar g.
The documented size range covers 3/8", 1/2" and 3/4". The selectable complete-unit rows on this page focus on 1/2" and 3/4", so final replacement should confirm the installed connection and duty.
Seri AE30 secara otomatis membuang udara dari sistem air panas dan dingin. Pelajari model, sambungan, batas tekanan/suhu, kapasitas udara, pemasangan, commissioning, perawatan, suku cadang, dan informasi pemesanan.
AVC32 adalah air vent termostatik balanced-pressure dari baja karbon Spirax Sarco dengan saringan datar terintegrasi. Komponen penahan tekanan diproduksi oleh pemasok yang disetujui TÜV sesuai AD-Merkblatt WO/TRD100, cocok untuk membuang udara dan gas non-condensable lain dari steam main bertekanan lebih tinggi atau titik tinggi peralatan.
AV13 selection is usually a model-specific air removal decision, with pressure, connection size and installation position checked before ordering.
Return to the air vents range when AV13 needs to be compared with other venting routes for steam, liquid systems or clean steam.
Use pipeline ancillaries when air removal is part of a wider line-protection decision involving separators, strainers or check valves.
Review air-venting guidance when warm-up time, air pockets or vent position still need to be confirmed.
