Spirax Sarco Steam Solutions for Industrial Steam Systems

SV73 is a grey cast iron semi-nozzle full-lift safety valve built to ASME Boiler and Pressure Vessel Code Sections I and VIII, with stainless steel trim, orifice sizes J to R, screwed NPT or ANSI 250 flanged connections, a 5-250 psi g set pressure range and 406/446 °F temperature limits; it is not CE marked and must not be used within the EEA.

BCR3150 is a 24 Vdc conductivity-based TDS blowdown monitor and limiter for boiler-water control and compatible conductive condensate-contamination monitoring systems.

Spirax Sarco BVA300 is a rack-and-pinion pneumatic rotary actuator family for quarter-turn ball-valve automation, available in double-acting and spring-return configurations with 3 to 8 bar g standard operating pressure and -30 °C to 100 °C standard temperature.

FT14-10 is a carbon steel float and thermostatic steam trap listed for 100 bar eff. operation, 1/2 inch to 2 inch sizes and NPT, socket-weld, butt-weld or flanged connections.

The M850 is a programmable flow computer for compensated steam, gas and liquid measurement, with 12 inputs, configurable calculations, local recording and plant communications. Wall-mounted M850-W and panel-mounted M850-P variants use 100-240 Vac and 24 Vdc supplies respectively.

FT46 is an austenitic stainless-steel ball float steam trap with automatic air venting, integral flanged connections and DN15–DN50 options for documented differential pressures up to 32 bar.

SV604 is a carbon-steel full-lift flanged safety valve for steam, inert industrial gas and water, with DN20–DN150 inlet sizes, documented PN40 or ASME 300 inlet connections, and a -10 °C to 400 °C temperature envelope subject to the technical limits.

LC3050 is a high and low level limiting monitor and alarm controller for conductive liquids in steam and hot water boilers, with LP30 or LP31 self-monitoring probe arrangements, automatic cyclic testing and dual SPCO alarm relays.